Branch Circuits & WiringQuestion 151 of 521
Each multiwire branch circuit must be provided with a means to simultaneously disconnect all what, at the point where the branch circuit originates?
a.Grounded conductors
b.Equipment grounding conductors
c.Neutral conductors only
d.Ungrounded conductors
Explanation
Section 210.4(B) requires a means to simultaneously disconnect all ungrounded (hot) conductors of a multiwire branch circuit at the point of origin, typically a handle tie or common-trip breaker. This prevents shock when servicing a shared neutral. Grounded, equipment grounding, and neutral-only choices misstate the rule.
Law Reference: 2023 NEC §210.4(B)Practice all 521 questions free — no signup required.
Related questions on this topic
- Branch-circuit conductors must have an ampacity not less than the maximum load to be served and, before the application of adjustment or correction factors, not less than what portion of the continuous load?
- A single receptacle installed on an individual branch circuit must have an ampere rating not less than what value relative to the branch circuit?
- On a 20-ampere branch circuit supplying two or more receptacles, a single cord-and-plug-connected utilization equipment item must not have a rating exceeding what value?
- In a dwelling unit, the voltage between conductors supplying lampholders, luminaires, and 15- and 20-ampere receptacles must not exceed what value?
- Under the 2023 NEC, how may a receptacle be installed to serve a kitchen countertop or work surface?
- A receptacle outlet serving a dwelling countertop must be located not more than what distance above the countertop surface?
Last reviewed: · editorial process
PrepPass Editorial Team · Verified against California CSLB C-10 Electrical Trade Examination · How we review