Testing & TroubleshootingQuestion 512 of 521
A single-phase load operates at 240 V and draws 20 A at unity power factor. What is its power in kilowatts?
a.12 kW
b.0.083 kW
c.4.8 kW
d.48 kW
Explanation
P = V x I = 240 V x 20 A = 4,800 W = 4.8 kW at unity power factor. Option a inverts, b divides V by I, and d misplaces the decimal. Confirming measured watts against the nameplate is part of functional commissioning.
Practice all 521 questions free — no signup required.
Related questions on this topic
- A branch-circuit breaker trips instantly every time it is reset, with nothing plugged in. Continuity from hot to ground reads near 0 ohms. What is the most likely fault?
- Three parallel loads on a 120 V circuit draw 4 A, 6 A, and 5 A respectively. What total current should a clamp meter read on the feeder conductor?
- A non-contact voltage tester (NCVT) does not light up near a conductor you must work on. Before treating the conductor as dead, what is the correct action?
- Before connecting a three-phase motor to a new feeder, why would you use a phase-rotation (phase-sequence) meter on the supply?
- Using the rule of thumb of 1 megohm minimum per 1,000 V of rating, what is the minimum acceptable insulation resistance for a 4,160 V motor?
- Why does over-torquing a lug or terminal screw create a hazard, even though the connection feels 'extra tight'?
Last reviewed: · editorial process
PrepPass Editorial Team · Verified against California CSLB C-10 Electrical Trade Examination · How we review