Water Supply & DistributionQuestion 13 of 360
Which of the following is an approved standard material for potable cold and hot water distribution piping inside a building?
a.Type L copper tube
b.Bituminous fiber pipe
c.Vitrified clay pipe
d.Concrete pipe
Explanation
Type L copper tube is a code-approved material for potable water distribution. Bituminous fiber, vitrified clay, and concrete pipe are drainage or sewer materials and are not approved for pressurized potable water inside a building.
Law Reference: 2022 California Plumbing Code (CPC) §604.1Practice all 360 questions free — no signup required.
Related questions on this topic
- Estimating demand for a small apartment, you total the fixtures as: 8 lavatories (1 WSFU each), 6 water closets with flush tanks (2.5 WSFU each), and 4 showers (2 WSFU each). What is the total water supply fixture unit (WSFU) load?
- A lawn sprinkler system has no chemical injection and no possibility of backpressure, only back-siphonage under continuous pressure. Which device is the appropriate minimum protection?
- A residence has a closed water supply system because the water meter contains a check valve and a pressure regulator. As the water heater heats water, pressure spikes dangerously. What does the code require to relieve this?
- A double check valve assembly (DC) is being selected for a cross-connection. Which application is appropriate for a DC assembly?
- A branch serves fixtures totaling 8 WSFU. Design velocity should be kept at or below about 8 feet per second to limit erosion and noise. If a given pipe size carries the demand at 6 fps, and the next size down would run at 11 fps, which is the better selection and why?
- What is the fundamental purpose of cross-connection control in a potable water system?
Last reviewed: · editorial process
PrepPass Editorial Team · Verified against California CSLB C-36 Plumbing Trade Examination · How we review