Gas PipingQuestion 263 of 360
Why must horizontal and vertical gas piping be supported at the intervals required by code?
a.Support intervals apply only to water piping
b.To prevent sagging, joint stress, and possible leaks, and to keep the piping secure over time
c.So the pipe can be used as structural support
d.Only to make it easier to paint
Explanation
Gas piping must be supported at the code-required spacing so it does not sag, which would stress joints, create low points that trap liquids, and risk leaks. Proper hangers and straps also keep the system secure against movement and vibration. Support spacing depends on pipe material and size and is listed in the fuel gas code.
Practice all 360 questions free — no signup required.
Related questions on this topic
- Compared with propane, how does natural gas behave if it leaks indoors?
- A sizing table (natural gas) shows 1/2-inch pipe carries 92 cfh and 3/4-inch pipe carries 190 cfh at the governing length. A section supplies a 40,000 BTU/hr wall furnace plus a 45,000 BTU/hr water heater. What is the smallest size that works?
- Which installation practice for a flexible appliance connector is correct?
- An older flexible connector is found kinked and corroded when a water heater is replaced. What is the correct action?
- Gas piping must pass through a concrete slab. What is the correct approach?
- When sizing gas piping, why does the code sometimes require adding equivalent lengths for fittings such as elbows and tees?
Last reviewed: · editorial process
PrepPass Editorial Team · Verified against California CSLB C-36 Plumbing Trade Examination · How we review