SafetyQuestion 1283 of 1605
A tag applied during tagout must:
a.Be optional if a lock is used
b.Be removed at the end of each shift regardless of status
c.Be attached to warn against operating the equipment and not be removed by anyone other than authorized personnel
d.Be a plain piece of paper with no words
Explanation
1926.417 requires tags to warn against energizing/operating equipment. Only authorized personnel may remove locks/tags, ensuring the servicing worker controls when the energy is restored.
Law Reference: 29 CFR 1926.417(b)Practice all 1605 questions free — no signup required.
Related questions on this topic
- On construction sites, which system is required to protect workers using 120-volt, single-phase, 15- and 20-amp receptacle outlets not part of the permanent wiring?
- Before using or handling any electrical equipment or cords, workers should:
- For cranes and equipment operating near overhead power lines up to 50 kV, what minimum clearance is generally required if the line is not de-energized and grounded?
- Head protection (hard hats) is required on a construction site whenever there is a possible danger of:
- Under OSHA's PPE rules, who generally must pay for required personal protective equipment?
- A worker is grinding metal, creating flying particles. What PPE is specifically required?
Last reviewed: · editorial process
Sen Lin, PrepPass Founder · Verified against California CSLB Contractor License Law & Business Exam · How we review
Reviewed by Abraham Chen — Licensed California General Contractor (CSLB License #1101856 — verify)