Advanced WiringQuestion 72 of 110
Which wiring method is acceptable in a Class I, Division 2 location?
a.Type NM
b.Type AC
c.Nonmetallic Romex
d.Type MC with listed fittings
Explanation
Class I, Division 2 permits methods such as threaded rigid metal conduit and Type MC cable with listed fittings; ordinary NM/AC cable is not permitted.
Law Reference: 2023 NEC 501.10(B)Practice all 110 questions free — no signup required.
Related questions on this topic
- Cables listed for power-limited fire alarm use are marked with which type designation?
- Two 10-HP, 460-V motors (14 A each) are supplied by one feeder. What minimum feeder conductor ampacity is required?
- A motor without a marked service factor (or with SF under 1.15) has a full-load current of 28 A. What is the maximum overload protection at 115%?
- A required branch circuit that supplies a sign or outline lighting system must be rated at least:
- Low-voltage lighting systems covered by Article 411 are limited to a maximum circuit voltage of:
- Electrical equipment supplying a decorative fountain must have what protection?
Last reviewed: · editorial process
PrepPass Editorial Team · Verified against Master Electrician Licensing Exam (NEC-based) · How we review