Equipment & SystemsQuestion 338 of 521
A disconnecting means for pool utilization equipment such as a pump motor must be within sight and located at least how far from the inside walls of the pool?
a.3 feet
b.10 feet
c.20 feet
d.5 feet
Explanation
Section 680.12 requires the disconnecting means for pool equipment to be readily accessible, within sight of the equipment, and located at least 5 feet horizontally from the inside walls of the pool unless separated by a permanent barrier. The 5-foot spacing keeps a person from reaching the disconnect while in the water.
Law Reference: 2023 NEC §680.12Practice all 521 questions free — no signup required.
Related questions on this topic
- When is a primary protector required on a communications circuit?
- What is the minimum size of the bonding/grounding conductor for a communications system?
- The equipotential bonding for perimeter surfaces around a permanently installed pool must extend how far from the inside walls of the pool?
- General-purpose receptacles serving a dwelling-unit pool must be located at least how far from the inside walls of the pool?
- What GFCI requirement applies to the outlets supplying a packaged self-contained spa or hot tub?
- How must the water in a permanently installed pool be bonded to the equipotential bonding system?
Last reviewed: · editorial process
PrepPass Editorial Team · Verified against California CSLB C-10 Electrical Trade Examination · How we review