SafetyQuestion 1275 of 1605
While climbing or working on a ladder, an employee must:
a.Carry heavy tools by hand
b.Not carry loads that could cause loss of balance
c.Slide down the side rails
d.Face away from the ladder
Explanation
1926.1053(b)(22) prohibits carrying loads on a ladder that could cause the worker to lose balance and fall. Workers should face the ladder and maintain three points of contact.
Law Reference: 29 CFR 1926.1053(b)(22)Practice all 1605 questions free — no signup required.
Related questions on this topic
- Supported scaffold poles, legs, or uprights must be plumb and braced, and generally must rest on:
- When a portable ladder is used to access an upper landing surface, the side rails must extend at least how far above the landing?
- For a non-self-supporting (leaning) portable ladder, what is the proper setup angle?
- The top step or top cap of a stepladder should be used how?
- A portable ladder is found with a broken rung and a cracked side rail. The correct action is to:
- Lockout/tagout (LOTO) procedures are primarily intended to protect workers from:
Last reviewed: · editorial process
Sen Lin, PrepPass Founder · Verified against California CSLB Contractor License Law & Business Exam · How we review
Reviewed by Abraham Chen — Licensed California General Contractor (CSLB License #1101856 — verify)