SafetyQuestion 1276 of 1605
The top step or top cap of a stepladder should be used how?
a.As a place to set the ladder's feet
b.As the preferred standing surface
c.Not as a step — do not stand on the top or top cap
d.Only when reaching high
Explanation
The top and top cap of a stepladder are not designed as steps. 1926.1053(b)(13) and manufacturer instructions prohibit standing on them because it destabilizes the ladder.
Law Reference: 29 CFR 1926.1053(b)(13)Practice all 1605 questions free — no signup required.
Related questions on this topic
- When a portable ladder is used to access an upper landing surface, the side rails must extend at least how far above the landing?
- For a non-self-supporting (leaning) portable ladder, what is the proper setup angle?
- While climbing or working on a ladder, an employee must:
- A portable ladder is found with a broken rung and a cracked side rail. The correct action is to:
- Lockout/tagout (LOTO) procedures are primarily intended to protect workers from:
- Before work begins near electrical circuits, if a worker could contact energized parts, the employer must:
Last reviewed: · editorial process
Sen Lin, PrepPass Founder · Verified against California CSLB Contractor License Law & Business Exam · How we review
Reviewed by Abraham Chen — Licensed California General Contractor (CSLB License #1101856 — verify)