Engine Repair (A1)Câu 16 / 120
Before final assembly, plastigage is used to measure:
a.Valve spring free length
b.Bearing oil clearance
c.Cylinder bore taper
d.Piston ring end gap
Giải thích
Plastigage is a crushable plastic thread that indicates bearing oil clearance when compared to a scale after the cap is torqued. Ring end gap is measured with a feeler gauge in the bore, and bore taper with a bore gauge. Correct clearance is essential for oil film and bearing life.
Luyện miễn phí toàn bộ 120 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Blue smoke from the exhaust under acceleration most often indicates:
- Technician A says timing-chain stretch can retard valve timing and set a camshaft/crankshaft correlation code. Technician B says a stretched timing chain has no effect on engine performance. Who is correct?
- Head bolts that use a torque-to-yield (TTY) design should be:
- The main function of engine oil, besides lubrication, includes all of the following EXCEPT:
- A rhythmic knocking noise that is loudest under load and disappears when one cylinder is disabled most likely indicates:
- Coolant is leaking internally and the engine oil appears milky. The MOST likely cause is:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với ASE Automobile Certification Series (A1–A8) · Quy trình kiểm tra