Suspension & Steering (A4)Câu 31 / 120
Camber angle is defined as the:
a.Forward or rearward tilt of the steering axis
b.Inward or outward tilt of the wheel from vertical, viewed from the front
c.Difference in toe between left and right wheels
d.Angle of the tie rod to the ground
Giải thích
Camber is the inward (negative) or outward (positive) tilt of the wheel from true vertical when viewed from the front. Incorrect camber causes uneven tire wear on one shoulder and can pull the vehicle to one side. It is adjusted where the suspension design allows.
Luyện miễn phí toàn bộ 120 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Excessive positive caster generally results in:
- Toe refers to the:
- A tire worn on both inner and outer edges, with good tread in the center, most likely indicates:
- Technician A says a worn tie rod end can cause a toe change and tire wear. Technician B says it can cause excessive play in the steering and a failed alignment. Who is correct?
- Technician A says worn shocks or struts can cause the body to keep bouncing after a bump. Technician B says worn dampers have no effect on tire wear. Who is correct?
- Cupping or scalloping tire wear is most commonly associated with:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với ASE Automobile Certification Series (A1–A8) · Quy trình kiểm tra