Brakes (A5)Câu 58 / 120
A brake caliper that sticks and does not release will most likely cause:
a.A soft pedal only
b.Dragging, overheating, and pulling to that side
c.Loss of all braking
d.A hard pedal at all times
Giải thích
A seized caliper keeps the pads applied, causing drag, excessive heat, uneven pad wear, and a pull toward that wheel. Overheated fluid can boil and reduce braking. Rebuilding or replacing the caliper and inspecting the slides and hose corrects it.
Luyện miễn phí toàn bộ 120 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Technician A says brake shoes are used in disc brakes. Technician B says brake shoes are used in drum brakes. Who is correct?
- Technician A says a grinding, metal-on-metal noise during braking indicates friction material worn past its limit. Technician B says continued driving in that condition can score the rotor or drum. Who is correct?
- A rear disc parking brake that will not hold is often caused by:
- The metering valve in a combination valve is used to:
- When bleeding a conventional hydraulic brake system, the general rule is to bleed:
- A proportioning valve in the brake system is designed to:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với ASE Automobile Certification Series (A1–A8) · Quy trình kiểm tra