Disinfection & SafetyCâu 22 / 100
Electrical clippers and trimmers that cannot be immersed in liquid should be:
a.Soaked fully in disinfectant
b.Never cleaned
c.Rinsed under running water
d.Cleaned of hair and disinfected with an EPA-registered spray or wipe designed for that use
Giải thích
Because immersing an electrical tool would damage it and create a shock hazard, clipper blades are cleaned of hair and then treated with an approved disinfectant spray or wipe. Detachable blades may also be removed and disinfected separately per manufacturer directions.
Trích dẫn luật: CCR Title 16 §979Luyện miễn phí toàn bộ 100 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A clean towel or neck strip is used to:
- An SDS (Safety Data Sheet) provides information primarily about:
- Good ventilation in a barbershop is important because it:
- Which is an example of a bloodborne pathogen of concern in a barbershop?
- When mixing a disinfectant concentrate, the barber should:
- Wet sanitizers or disinfectant containers used for immersing tools must be:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California Barber Written Licensing Exam · Quy trình kiểm tra