Clinical ProceduresCâu 37 / 100
What are the standard EKG paper speed and sensitivity settings used for a routine 12-lead tracing?
a.25 mm per second at 10 mm per millivolt
b.50 mm per second at 5 mm per millivolt
c.10 mm per second at 25 mm per millivolt
d.5 mm per second at 1 mm per millivolt
Giải thích
The standard settings are a paper speed of 25 mm per second and a gain of 10 mm per millivolt, so each small box equals 0.04 second horizontally and 0.1 millivolt vertically. Doubling the speed to 50 mm per second is only used for special situations such as very fast rhythms and must be noted on the strip. Nonstandard settings make rate and interval measurements invalid unless clearly documented.
Luyện miễn phí toàn bộ 100 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Just before giving an injection, the medical assistant notices the vial label does not match the medication written in the provider's order. What should be done first?
- When performing a 12-lead EKG, where is lead V1 placed?
- An EKG tracing shows a wandering, wavy baseline with fuzzy spikes across all leads. The patient is shivering and talking. What is the most likely cause and correction?
- A rhythm strip shows regular QRS complexes at a rate of 76 beats per minute, each preceded by an upright P wave with a consistent PR interval. How is this rhythm best described?
- Following the standard order of draw, which tube is collected immediately after the light blue sodium citrate tube?
- A medical assistant applies a tourniquet and then has trouble locating a vein. After how long should the tourniquet be released?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với NHA Certified Clinical Medical Assistant (CCMA) Exam · Quy trình kiểm tra