Clinical ProceduresCâu 46 / 100
Which set of conditions represents standard steam autoclave sterilization for wrapped instruments?
a.160°F at 5 psi for 5 minutes
b.212°F at 0 psi for 60 minutes
c.250°F, about 121°C, at 15 psi for roughly 20 to 30 minutes depending on the load
d.300°F at 30 psi for 3 minutes
Giải thích
Standard gravity steam sterilization uses about 250°F, or 121°C, at 15 psi with an exposure time near 20 to 30 minutes for wrapped items, plus drying time. Boiling water at 212°F and 0 psi does not reach sterilization conditions and only disinfects. The very low and very high settings listed do not match accepted autoclave parameters and would either fail to sterilize or damage instruments.
Luyện miễn phí toàn bộ 100 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A patient scheduled for a blood draw had a left mastectomy with lymph node removal and has an IV running in the right forearm. What should the medical assistant do?
- What is the correct needle angle for a routine venipuncture in the antecubital fossa?
- Before running patient samples on a waived glucose meter, the medical assistant runs the low and high control solutions. Why is this step required?
- Which method most reliably confirms that an autoclave is actually killing microorganisms?
- While setting up a sterile field for a minor office surgery, which action maintains sterility?
- The provider asks the medical assistant to prepare instruments for suture removal. Which instruments are needed?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với NHA Certified Clinical Medical Assistant (CCMA) Exam · Quy trình kiểm tra