InspectionCâu 28 / 60
What is the correct way to begin the air brake check for build-up rate in a dual air system?
a.Drain all the tanks completely first
b.With the engine at operating rpm, check that pressure builds from about 85 to 100 psi within about 45 seconds
c.Apply the parking brake and rev the engine
d.Disconnect the trailer air lines
Giải thích
In a dual air system, with the engine at operating rpm, the pressure should build from about 85 to 100 psi within about 45 seconds. If air pressure does not build up fast enough, your pressure may drop too low during driving, requiring you to stop and wait to build air. Slow build-up indicates a problem to be fixed.
Luyện miễn phí toàn bộ 60 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- During a walk-around inspection, how do you check manual slack adjusters on S-cam brakes?
- When checking the air compressor during inspection, what should you look at if it is belt-driven?
- How do you test the low-pressure warning signal?
- At what pressure should the spring brakes come on automatically during the continued-air-loss test?
- How do you perform the static leakage (applied pressure) test on a straight truck with air brakes?
- For a single vehicle (straight truck), what is the maximum allowable air pressure loss in one minute with the brakes applied?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với CDL Air Brakes Knowledge Test · Quy trình kiểm tra