System PartsCâu 3 / 60
At about what pressure does the governor typically cut out the compressor from pumping air?
a.Around 125 psi
b.Around 60 psi
c.Around 200 psi
d.Around 20 psi
Giải thích
The governor usually cuts out the compressor at about 125 psi, stopping it from pumping more air into the tanks. It cuts the compressor back in at about 100 psi to keep the system in the normal operating range. These values keep tank pressure within a safe working band.
Luyện miễn phí toàn bộ 60 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- What is the purpose of the air compressor in an air brake system?
- What does the air compressor governor control?
- Why do air storage tanks have a drain valve at the bottom?
- What is the danger of water collecting in the air storage tanks?
- What is the function of the S-cam in a drum air brake?
- Spring brakes on a truck are held in the released position by what?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với CDL Air Brakes Knowledge Test · Quy trình kiểm tra