Vehicle InspectionCâu 10 / 120
While checking the tractor's fifth wheel during your walkaround, what condition tells you the coupling is unsafe?
a.The locking jaws are closed around the shank of the kingpin
b.There is a light coat of grease on the fifth wheel plate
c.There is visible space between the upper and lower fifth wheel plates
d.The release handle is in the locked position
Giải thích
Any gap between the upper and lower fifth wheel plates means the trailer is not fully seated and the coupling can fail. Jaws closed around the kingpin shank, grease on the plate, and a locked release handle are all signs of a proper coupling.
Luyện miễn phí toàn bộ 120 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Which sequence correctly describes the seven-step inspection method?
- You finish a run in a property-carrying truck and discover the right rear turn signal stopped working during the trip. What must you do at the end of the day?
- Which set of emergency equipment must be on board a commercial motor vehicle?
- You are checking steering-system play on a vehicle with a 20-inch steering wheel. How much free play is generally the maximum before the steering is considered defective?
- You are inspecting the suspension on a trailer axle and find the main leaf of a leaf spring is broken. What is the correct action?
- Why is a leaking exhaust system a serious defect that must be corrected before driving?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với Commercial Driver's License (CDL) General Knowledge Test · Quy trình kiểm tra