Safe DrivingCâu 43 / 120
You have just driven through deep standing water and your brakes feel weak. What should you do?
a.Stop immediately and wait for the brakes to air dry
b.Drive slowly while applying light pressure to the brakes to generate heat and dry them out
c.Pump the brake pedal rapidly while accelerating
d.Set the parking brake while rolling
Giải thích
Light steady pressure while moving slowly creates the friction heat that dries wet linings and restores braking. Waiting can leave the brakes wet, rapid pumping while accelerating does not create sustained heat, and applying the parking brake while rolling can lock the drive wheels.
Luyện miễn phí toàn bộ 120 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Where are the largest blind spots on a tractor-trailer?
- You are driving at night on an unlit two-lane road. Why should you keep your speed low enough to stop within the distance your headlights illuminate?
- You run into dense fog on the highway. What is the best course of action?
- At what speed can hydroplaning begin when there is a large amount of water on the road?
- Your drive wheels begin to skid when you brake hard on a slick surface. What is the correct recovery?
- You are steering into a corner and the front end pushes straight ahead instead of turning. What is the most likely cause of this front-wheel skid?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với Commercial Driver's License (CDL) General Knowledge Test · Quy trình kiểm tra