Safe DrivingCâu 49 / 120
You are entering a highway work zone with reduced lanes and workers present. What is the correct driving behavior?
a.Maintain highway speed until you see a worker in the lane
b.Change lanes as often as needed to keep moving
c.Slow to the posted work-zone speed, increase following distance, avoid unnecessary lane changes, and watch for workers and equipment
d.Use the shoulder to bypass slow traffic
Giải thích
Work zones combine narrowed lanes, sudden stops, and people on foot, so lower speed and extra space are essential, and fines are often doubled. Maintaining highway speed, weaving between lanes, and using the shoulder all increase the risk to workers and to you.
Luyện miễn phí toàn bộ 120 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- You are steering into a corner and the front end pushes straight ahead instead of turning. What is the most likely cause of this front-wheel skid?
- You are driving a placarded hazardous materials load and approach an unguarded railroad crossing. What must you do?
- Why should you never start across a railroad crossing unless you are certain you can clear it completely?
- You are about to change lanes on a busy interstate. What is the correct communicating procedure?
- You must stop on the shoulder of a divided highway because of a mechanical problem. Where do you place your warning devices?
- You are driving an empty flatbed trailer in strong crosswinds on an open stretch of highway. What is the greatest concern?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với Commercial Driver's License (CDL) General Knowledge Test · Quy trình kiểm tra