Emergencies & HazardsCâu 93 / 120
You have just left the shipper with a secured load. When must you first re-inspect the cargo and its securement?
a.Within the first 50 miles of the trip
b.Only at the destination
c.After 500 miles
d.Only if the load shifts noticeably
Giải thích
The rule requires an inspection within the first 50 miles, then a re-examination every 150 miles or every 3 hours of driving, whichever comes first. Waiting until the destination, 500 miles, or a noticeable shift means the securement has already failed.
Trích dẫn luật: 49 CFR §392.9Luyện miễn phí toàn bộ 120 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- You are using a fire extinguisher on a small cargo fire. What is the correct technique?
- What is the minimum fire extinguisher rating required on a vehicle transporting hazardous materials that requires placards?
- You are the first vehicle at the scene of a crash on a rural highway. What is the correct order of priorities?
- What is the minimum aggregate working load limit for the tiedowns securing a piece of cargo?
- You are securing a single 12-foot pipe weighing 1,800 pounds on a flatbed. How many tiedowns are required at minimum?
- Your load is stacked high in a van trailer with the heaviest cases on top. Why is this dangerous?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với Commercial Driver's License (CDL) General Knowledge Test · Quy trình kiểm tra