Safe DrivingCâu 56 / 80
When a bus stops at a railroad crossing, the driver should:
a.Open the door if required, look and listen, then cross without shifting gears on the tracks
b.Rev the engine and jump the tracks
c.Stop with the front bumper on the rail
d.Let passengers off on the tracks
Giải thích
Many rules require opening the door and window at the crossing to look and listen for a train. Once you are sure it is safe, cross the tracks in a gear that you will not need to change while on them. Never change gears while any part of the bus is on the tracks.
Luyện miễn phí toàn bộ 80 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- At a railroad crossing, buses are generally required to:
- A bus should not begin to cross railroad tracks unless:
- When you must stop for a railroad crossing, you should stop:
- On slippery roads, a bus driver should:
- When approaching a stop to unload passengers, you should brake:
- Because a bus is tall and heavy, when going around curves the driver should:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với CDL Passenger (P) Endorsement Knowledge Test · Quy trình kiểm tra