Railroad & SpecialCâu 37 / 80
When stopped at a railroad crossing, the bus's hazard warning flashers should generally be:
a.Turned on to warn traffic behind you that you are stopping
b.Turned off to avoid confusion
c.Replaced by the red student-loading lights
d.Alternated with the headlights
Giải thích
Activating the hazard flashers as you slow and stop at a crossing warns following drivers that the bus is stopping, since they may not expect it. Do not use the red student loading lights, which are only for loading and unloading. Follow your state and district policy on flasher use at crossings.
Luyện miễn phí toàn bộ 80 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- 'Storing enough room' at a railroad crossing means:
- At a crossing with multiple tracks, after one train passes you should:
- Placing the transmission in the correct gear before a crossing matters because:
- If a railroad crossing gate is down or lights are flashing, you must:
- A common misjudgment drivers make at crossings is that:
- The safest practice regarding stopping distance for a train is to remember that a train:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với CDL School Bus (S) Endorsement Knowledge Test · Quy trình kiểm tra