Hardware & Network TroubleshootingCâu 79 / 100
A laptop displays 'No bootable device' after working fine yesterday. What is a good first step?
a.Replace the screen
b.Reinstall Wi-Fi drivers
c.Check boot order and verify the drive is detected in BIOS/UEFI
d.Increase RAM
Giải thích
This message suggests the firmware cannot find a boot drive, so verify the boot order and whether the drive is detected in BIOS/UEFI. A missing drive there points to a loose or failing disk.
Luyện miễn phí toàn bộ 100 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A PC powers on and fans spin, but there is no video and no beep. What is a reasonable early check?
- A user cannot reach any website, but other devices on the same network can. What should be checked first on that PC?
- A computer's clock and BIOS settings reset on each boot. What component should be replaced?
- A printer prints faint, streaky output on a laser printer. Which component is the most likely cause?
- A system randomly reboots under heavy load. Which cause should be investigated?
- A user reports intermittent Wi-Fi drops only in a back room. What is the most likely cause?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với CompTIA A+ Core 1 (220-1101) · Quy trình kiểm tra