Networking ConceptsCâu 19 / 100
What is the purpose of a default gateway on a host's IP configuration?
a.To resolve domain names into IP addresses
b.To assign IP addresses to other hosts
c.To forward traffic destined for remote networks
d.To encrypt outbound traffic automatically
Giải thích
The default gateway is the router interface a host uses to reach destinations outside its local subnet. Without it, a host can only communicate on its own network. Traffic for remote networks is sent to the gateway for further routing.
Luyện miễn phí toàn bộ 100 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A /24 network needs to be divided into four equal subnets. Which new prefix length should be used?
- Which network device forwards frames based on MAC address tables and operates primarily at Layer 2?
- Which IEEE standard defines VLAN tagging on Ethernet trunk links?
- Which frequency band and standard pairing offers wider channels and higher throughput but shorter range?
- Which protocol uses TCP port 22 to provide encrypted remote command-line access?
- In a client-server architecture, what best describes the role of the server?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với CompTIA Network+ (N10-009) · Quy trình kiểm tra