Network TroubleshootingCâu 81 / 100
A fiber link shows very high signal loss and intermittent connectivity. Which physical issue is a likely cause?
a.A dirty or damaged fiber connector
b.An incorrect VLAN assignment
c.A missing default gateway
d.A DHCP scope exhaustion
Giải thích
Dirty, scratched, or damaged fiber connectors cause high signal attenuation and intermittent link problems. Cleaning connectors and inspecting for damage is a standard first check. Optical power meters help quantify the loss.
Luyện miễn phí toàn bộ 100 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A client receives an address in the 169.254.x.x range. What does this most likely indicate?
- Which command-line tool traces the path packets take to a destination, revealing each hop along the way?
- Two devices on the same subnet cannot communicate, and one shows a duplicate IP address error. What is the likely cause?
- Users on one switch experience slow performance, and the interface shows a rising count of CRC errors. What does this most likely indicate?
- Which tool would a technician use to verify that a newly terminated Ethernet cable has correct pinouts and no opens or shorts?
- A wireless client experiences a weak signal and frequent disconnects far from the access point. Which term describes this coverage limitation?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với CompTIA Network+ (N10-009) · Quy trình kiểm tra