Core TradesCâu 182 / 700
What is the MINIMUM required width of clear working space in front of a service panel or motor control center rated 600 volts or less?
a.24 inches
b.30 inches or the width of the equipment, whichever is greater
c.18 inches
d.48 inches in all cases
Giải thích
The working space in front of electrical equipment must be at least 30 inches wide, or the width of the equipment if that is greater, so a worker can operate and service it safely. 24 and 18 inches are too narrow, and 48 inches is more than the general minimum required.
Trích dẫn luật: 2025 CA Electrical Code, Article 110 (Working Space)Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- In a service panel, the main bonding jumper serves PRIMARILY to:
- In a dwelling kitchen, what is the MINIMUM number of 20-ampere small-appliance branch circuits required to serve the countertop receptacle outlets?
- Using a volume allowance of 2.0 cubic inches per 14 AWG conductor, what is the MINIMUM box volume required for a box containing eight 14 AWG conductors (no devices or clamps)?
- When a driven ground rod is used as a grounding electrode, what is the MINIMUM length that must be in contact with the soil?
- Ampacity derating (adjustment) for bundled conductors generally begins to apply once a raceway or cable contains MORE than how many current-carrying conductors?
- Limiting the developed length of a fixture's trap arm (the distance from the trap to its vent) is important PRIMARILY to:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra