Core TradesCâu 195 / 700
Under the California Energy Code, sealing forced-air duct systems is required PRIMARILY to:
a.Limit conditioned-air leakage so the system delivers heating and cooling efficiently
b.Increase the noise level of the air handler
c.Allow smaller-diameter ducts to be used everywhere
d.Eliminate the need for duct insulation
Giải thích
Duct sealing (verified by leakage testing) limits the loss of conditioned air so the system delivers the intended heating and cooling efficiently. It is not meant to increase noise, does not by itself allow undersized ducts, and does not remove the separate requirement to insulate ducts in unconditioned spaces.
Trích dẫn luật: 2025 CA Energy Code (Title 24, Part 6)Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- When a check valve or pressure-reducing valve creates a 'closed' water system, a thermal expansion tank is required PRIMARILY to:
- Under current California requirements, newly constructed dwellings must generally provide:
- Using the all-outdoor two-permanent-opening method at a rate of 1 square inch per 4,000 Btu/hr per opening, what is the MINIMUM net free area of EACH opening for a 100,000 Btu/hr furnace?
- What is a common MINIMUM intermittent exhaust airflow required for a residential bathroom fan?
- What is the typical MINIMUM clearance to combustible materials for a single-wall metal vent connector on a fuel-burning appliance?
- A ducted residential kitchen range hood that exhausts to the outdoors is commonly required to move a MINIMUM intermittent airflow of about:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra