Framing & StructuralCâu 317 / 700
In a braced wall line, what does the term 'braced wall panel' refer to?
a.A specific length of wall, sheathed and fastened as prescribed, that resists lateral (wind/seismic) loads
b.Any interior partition that divides two rooms
c.The drywall finish applied to the room side of a wall
d.A prefabricated window header assembly
Giải thích
A braced wall panel is a defined, code-compliant segment of a braced wall line, built and fastened by an approved bracing method, that provides the wall's resistance to wind and earthquake forces. It is not simply any partition, the drywall finish, or a header assembly.
Trích dẫn luật: 2025 CA Residential Code §R602.10Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Where the two members of a double top plate are spliced (end joints), how must the joints in the upper and lower plates be arranged?
- Fireblocking is required in concealed wall spaces primarily to accomplish what?
- Which material is generally ACCEPTABLE as fireblocking in a concealed stud space?
- In conventional roof framing, where should rafter ties (which resist the outward thrust of rafters) generally be located?
- What is the practical difference between a collar tie and a rafter tie in a gable roof?
- When rafters frame to a non-structural ridge board (not a ridge beam), what is the minimum requirement for that ridge board's depth?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra