Framing & StructuralCâu 325 / 700
CALCULATION: A building is 28 feet wide with a central ridge. Ignoring ridge-board thickness, what horizontal run does each common rafter span from the exterior wall to the ridge?
a.14 feet
b.28 feet
c.7 feet
d.21 feet
Giải thích
For a symmetric gable, each common rafter spans half the building width horizontally: 28 / 2 = 14 feet of run (the small ridge-board thickness is ignored here). 28 feet is the full width, 7 feet is a quarter, and 21 feet is three-quarters of the width.
Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Collar ties used to resist wind uplift should be spaced no farther apart than what, measured along the ridge?
- CALCULATION: A common rafter runs horizontally 12 feet from the wall to the ridge and rises 9 feet. Ignoring overhang and cuts, what is the approximate rafter line length?
- CALCULATION: A gable roof has a 5:12 slope. If the horizontal run from the wall to the ridge is 24 feet, what is the rafter line length (rounded to the nearest foot, ignoring overhang)?
- On the jobsite, cutting, notching, or drilling the chords or webs of a prefabricated wood truss is:
- What is the purpose of permanent lateral bracing on the web members of long-span roof trusses?
- When a bird's-mouth seat cut is made where a rafter bears on the top plate, what limits how deep that notch may be cut?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra