Finish TradesCâu 406 / 700
Before applying finish paint to new interior gypsum board, which step is MOST important for a uniform finished appearance?
a.Applying two topcoats without any primer
b.Applying a primer or sealer to equalize porosity between paper and joint compound
c.Sanding the entire wall down to the gypsum core
d.Thinning the topcoat with water by half
Giải thích
A primer or drywall sealer equalizes the different absorption rates of the paper facing and the joint compound so the topcoat looks uniform and joints do not flash. Skipping primer causes uneven sheen, sanding to the core damages the board, and heavily thinning the topcoat ruins coverage.
Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- When applying a clear water-based polyurethane finish to interior wood floors, why is light sanding between coats recommended?
- Before applying a moisture-cure or solvent finish in an enclosed room, the MOST important safety practice is to:
- Under CALGreen, an automatic irrigation controller installed for new landscaping is generally required to be:
- Under CALGreen, interior architectural paints and coatings applied in a project must comply with limits on which characteristic to reduce indoor air pollution?
- When setting ceramic tile over a wet area such as a shower wall, which backing material is the BEST choice directly behind the tile?
- When installing large-format porcelain floor tile, keeping mortar coverage high under the tile is MOST important because it primarily prevents which problem?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra