Finish TradesCâu 477 / 700
On the garage side of a wall separating an attached garage from the dwelling, gypsum board used for the required separation must be at least what?
a.1/4-inch regular gypsum board
b.5/8-inch Type X gypsum board
c.1/8-inch hardboard paneling
d.3/8-inch regular gypsum board
Giải thích
The garage-to-dwelling separation must be protected with at least 5/8-inch Type X (fire-rated) gypsum board on the garage side. Quarter-inch or 3/8-inch regular board and thin hardboard paneling do not meet the required fire-resistance for this separation.
Trích dẫn luật: 2025 CA Residential Code §R302.6Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- In finish carpentry, why are inside corners of base or crown molding often coped rather than mitered?
- Porous natural stone such as travertine or honed limestone is typically sealed before use MAINLY to accomplish what?
- When finishing exterior ferrous metal such as a steel handrail or fabricated gate, which coating step is MOST important to apply first?
- Before installing engineered wood flooring over a concrete slab-on-grade, a 6-mil polyethylene (or equivalent) vapor retarder is commonly placed MAINLY to do what?
- Unit skylights glazed with glass in a sloped position over occupied space are generally required to use what type of glass for occupant safety?
- Under CALGreen landscape provisions, automatic irrigation systems installed for new construction are generally required to use what type of controller?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra