Finish TradesCâu 485 / 700
Under CALGreen, composite wood products used indoors, such as particleboard and hardwood plywood in cabinets, must comply with formaldehyde emission limits mainly to protect what?
a.The structural rating of the cabinet
b.The gloss level of the finish
c.Indoor air quality and occupant health
d.The cabinet's resistance to earthquakes
Giải thích
Composite wood can off-gas formaldehyde, so CALGreen caps emissions to protect indoor air quality and occupant health. The requirement is not about structural rating, finish gloss, or seismic resistance, which are addressed by other provisions.
Trích dẫn luật: 2025 CALGreen §4.504.5Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Unit skylights glazed with glass in a sloped position over occupied space are generally required to use what type of glass for occupant safety?
- Under CALGreen landscape provisions, automatic irrigation systems installed for new construction are generally required to use what type of controller?
- Before disturbing painted surfaces during a repaint in a home built before 1978, a contractor must MOST importantly follow what requirement?
- When building a tiled shower floor with a traditional mortar bed and drain, the finished floor should slope toward the drain at approximately what minimum rate?
- For very narrow tile joints (about 1/16 to 1/8 inch), which grout type is generally the BEST choice?
- When cabinets or millwork will be installed in a consistently damp area, which substrate is generally the BEST choice for the cabinet boxes?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra