SafetyCâu 510 / 700
A worker is exposed to an unprotected edge on an elevated surface during construction. What is the general Cal/OSHA expectation for fall protection?
a.Provide fall protection such as guardrails, personal fall arrest systems, or safety nets where workers are exposed to falls to a lower level
b.Fall protection is only required above 30 feet
c.A verbal warning to be careful satisfies the requirement
d.Fall protection applies only to roofing work
Giải thích
Cal/OSHA requires fall protection, guardrail systems, personal fall arrest, or safety nets, wherever workers are exposed to falls to a lower level beyond the regulated trigger height for the operation. Option a states this correctly. There is no blanket 30-foot rule (b), a verbal warning does not control the hazard (c), and fall protection applies across many operations, not just roofing (d).
Trích dẫn luật: Cal/OSHA Title 8, Construction Safety OrdersLuyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Under Cal/OSHA Construction Safety Orders, when a trench reaches a depth that requires protection, which is the BEST way to protect workers who must enter it?
- Before workers enter an excavation 5 feet or deeper, which inspection practice does Cal/OSHA require?
- A standard guardrail system used for fall protection must have a top rail at approximately what height above the walking surface?
- A portable straight ladder is used to access a roof. Cal/OSHA and safe practice require it to extend approximately how far above the upper landing?
- Cutting concrete and masonry generates respirable crystalline silica dust. What is the BEST engineering control to reduce worker exposure?
- Which combination of personal protective equipment (PPE) is MOST appropriate for a laborer operating a gas-powered concrete saw?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra