SafetyCâu 516 / 700
A supported scaffold platform is being erected for masonry work. Which practice BEST meets Cal/OSHA scaffold safety requirements?
a.Leave gaps in the planking so tools can be passed through
b.Fully plank the work platform, provide guardrails or fall protection, and have a qualified person oversee erection on an adequate foundation
c.Set the scaffold on loose blocks and stacked bricks
d.Allow one more level of height than the manufacturer rates
Giải thích
Cal/OSHA requires scaffolds to be fully planked, supported on a firm and level foundation with base plates and mud sills, equipped with guardrails or other fall protection at height, and erected under the supervision of a qualified person within rated capacity. Option b captures this. Gaps in planking (a), unstable makeshift supports (c), and exceeding rated height (d) are common causes of scaffold collapse.
Trích dẫn luật: Cal/OSHA Title 8, Construction Safety OrdersLuyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A portable straight ladder is used to access a roof. Cal/OSHA and safe practice require it to extend approximately how far above the upper landing?
- Cutting concrete and masonry generates respirable crystalline silica dust. What is the BEST engineering control to reduce worker exposure?
- Which combination of personal protective equipment (PPE) is MOST appropriate for a laborer operating a gas-powered concrete saw?
- Work is being performed in a travel lane on a city street. According to the California MUTCD, what is the PRIMARY purpose of a properly designed temporary traffic control zone?
- A flagger is directing one-way traffic through a work zone. Which practice BEST follows California MUTCD flagging requirements?
- A grading project disturbs more than one acre of soil. What environmental document is generally required to control construction stormwater discharges?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra