SafetyCâu 565 / 700
Before a worker is required to wear a tight-fitting respirator on the job, what does Cal/OSHA require FIRST?
a.Only that the worker signs a waiver
b.A medical evaluation and a fit test for that respirator
c.That the worker buys their own respirator
d.Nothing, as long as the respirator is new
Giải thích
Employees required to use tight-fitting respirators must first receive a medical evaluation to ensure they can safely wear one, and be fit tested for the specific make, model, and size, along with training. Option a substitutes a waiver for real safeguards. Option c wrongly shifts responsibility to the worker. Option d ignores medical and fit-test requirements. These steps ensure the respirator actually protects the wearer.
Trích dẫn luật: Cal/OSHA Title 8 §5144Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A supported scaffold platform is more than 7.5 feet above the lower level. Which practice BEST meets Cal/OSHA fall-protection requirements for workers on the platform?
- A load is lifted with a two-leg sling. As the angle between the sling legs and the load becomes smaller (the legs spread wider), what happens to the tension in each leg?
- A contractor's crews routinely cut, grind, and drill concrete, creating respirable crystalline silica. Beyond dust controls, what written program does Cal/OSHA require?
- At the end of the day, a crew must clean up concrete dust that contains silica. Which housekeeping method is BEST to limit worker exposure?
- A worker must clear a jam inside a powered concrete mixer. What is the BEST practice to prevent the machine from starting during the work?
- On a construction site, what are the TWO commonly accepted ways to protect workers from ground faults when using temporary power for hand tools?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra