SafetyCâu 577 / 700
Workers will sand and torch-cut steel coated with old lead-based paint. Under Cal/OSHA lead rules, what is the BEST early step to protect them?
a.Conduct an exposure assessment and provide controls, respirators, and hygiene facilities as needed
b.Give workers milk to drink during the shift
c.Rely on an open-air breeze to carry lead fumes away
d.Only act if a worker later feels sick
Giải thích
When work can generate airborne lead, the employer must assess worker exposure and, based on the results, provide engineering controls, respiratory protection, protective clothing, and hygiene facilities such as handwashing before eating. Option b is a myth with no protective value. Option c does not control inhalation of lead fumes. Option d waits for symptoms of a serious health hazard. Early assessment drives the right protections before harm occurs.
Trích dẫn luật: Cal/OSHA Title 8 §1532.1Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Concrete trucks need a place to rinse out their chutes on site. What is the BEST practice to protect the environment?
- Drums of fuel and solvents are stored on a jobsite. What is the BEST practice to prevent spills from reaching soil or storm drains?
- Before demolishing interior finishes in a commercial building from the 1970s, what is the BEST first step regarding possible asbestos?
- Under Cal/OSHA, what safety document must every California construction employer establish and maintain in writing?
- A worker operates from the platform of an articulating boom lift. What is the BEST fall-protection practice for that worker?
- Before a mobile crane makes a lift on a jobsite, which combination of practices BEST supports a safe lift?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra