Planning & EstimatingCâu 591 / 700
A brick veneer wall is 9 ft high and 24 ft long. Using about 6.75 modular bricks per square foot of wall face, what is the APPROXIMATE brick count (before waste)?
a.216 bricks
b.1,296 bricks
c.1,458 bricks
d.972 bricks
Giải thích
Wall face = 9 x 24 = 216 sq ft. Bricks = 216 x 6.75 = 1,458 (c). Option (a) forgets the 6.75 factor. Option (b) uses 6.0 per sq ft. Option (d) uses 4.5 per sq ft.
Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A 24-ft wall is framed with studs at 16 inches on center, with a stud at each end and no openings, PLUS a 2-stud corner assembly added at one end. What is the MINIMUM stud count?
- A 40-ft wall is framed with studs at 24 inches on center, with a stud at each end and no openings. What is the MINIMUM stud count?
- A concrete masonry wall is 10 ft high and 30 ft long, built with standard 8x8x16 CMU. Using the rule of 1.125 blocks per square foot of wall face, what is the MINIMUM number of blocks (before waste)?
- A room is 12 ft by 16 ft with 8 ft ceilings. You will hang 4x8 gypsum board on all four walls AND the ceiling, ignoring openings and waste. What is the MINIMUM number of full sheets?
- A roof has 2,400 square feet of surface area. Adding 15 percent for waste, how many roofing squares should be ordered (1 square = 100 sq ft)?
- A ceiling is 30 ft by 40 ft and will receive two coats of paint. If coverage is 400 sq ft per gallon per coat, what is the MINIMUM number of gallons to buy?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra