Planning & EstimatingCâu 635 / 700
Which drawing type shows a building as if cut vertically to reveal interior heights, floor and wall assemblies, and how components connect?
a.A floor plan, which is a horizontal cut viewed from above.
b.An exterior elevation, a straight-on view of a building face.
c.A section, a vertical cut through the building.
d.A site plan showing the building footprint on the lot.
Giải thích
Correct: a section is drawn as a vertical cut through the building to reveal interior heights and the makeup of walls, floors, and roofs. A plan is a horizontal cut seen from above. An elevation is a flat, straight-on view of an exterior or interior face. A detail (not listed as correct here) is an enlarged view of a small area; a site plan shows the whole lot.
Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- When contract documents conflict and there is no special precedence clause, which GENERAL rule do most construction contracts apply?
- On a drawing at 1/4 inch = 1 foot-0 inches, a wall measures 3 inches long on the paper. What is the actual length of that wall?
- On a civil drawing using an engineer's scale of 1 inch = 20 feet, a property line measures 4.5 inches on the paper. What is its actual length, and how does an engineer's scale differ from an architect's scale?
- On a set of construction drawings, what is the PRIMARY purpose of a door schedule?
- On construction drawings, what does a 'revision cloud' with a triangular 'delta' symbol indicate?
- Which statement BEST reflects required inspection timing for concealed work?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra