IrrigationCâu 2 / 100
Precipitation rate for a sprinkler zone is calculated using which formula?
a.PR = GPM x 60 x area
b.PR = area / (96.3 x GPM)
c.PR = (96.3 x GPM) / area
d.PR = PSI x GPM / 96.3
Giải thích
Precipitation rate in inches per hour equals 96.3 times the total GPM applied divided by the area in square feet covered by the heads. The constant 96.3 converts gallons per minute over square feet into inches per hour. This tells the designer how fast water is being applied so it can be matched to soil intake.
Luyện miễn phí toàn bộ 100 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A rotor sprinkler head throwing water 30 feet is BEST described as which type of irrigation component?
- A zone has four heads each using 3 GPM covering a total area of 400 square feet. What is the approximate precipitation rate?
- Under California's Model Water Efficient Landscape Ordinance (MWELO), overhead spray irrigation is generally prohibited in landscape areas narrower than what width?
- A reduced pressure principle (RP) backflow assembly is primarily used to protect a potable water supply against what?
- A pressure vacuum breaker (PVB) must be installed at what minimum height relative to the highest downstream sprinkler head or outlet?
- An atmospheric vacuum breaker (AVB) has which key installation limitation?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-27 Landscaping Trade Exam · Quy trình kiểm tra