IrrigationCâu 25 / 100
A rain sensor or rain shutoff device connected to a controller does what?
a.Increases run time during storms
b.Suspends irrigation when sufficient rainfall is detected
c.Boosts water pressure
d.Measures soil pH
Giải thích
A rain sensor interrupts the controller's watering cycle once it detects a set amount of rainfall, preventing irrigation during and shortly after storms. This avoids the waste of watering an already-wet landscape. Many California water agencies require or encourage rain shutoff devices on new systems.
Luyện miễn phí toàn bộ 100 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- An irrigation solenoid valve is operated by what signal from the controller?
- Under MWELO, the Maximum Applied Water Allowance (MAWA) is based primarily on which factors?
- Subsurface drip irrigation is especially useful in which situation?
- Cycling a station into several short run times instead of one long run is called cycle-and-soak and mainly prevents what?
- A flow sensor connected to a smart controller is MOST useful for detecting what problem?
- To convert a flow of 12 GPM to gallons per hour for scheduling, what is the result?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-27 Landscaping Trade Exam · Quy trình kiểm tra