Surface PreparationCâu 1 / 100
Before repainting a previously painted, chalky exterior stucco wall, what is the FIRST thing a painter should do to ensure adhesion?
a.Apply two finish coats without priming
b.Wash the surface to remove chalk, dirt, and loose material
c.Sand the stucco smooth with 220-grit paper
d.Spray a heavy fog coat of the finish color
Giải thích
Chalk and surface contamination prevent a new coating from bonding. Washing (often with a pressure washer or detergent solution) removes the chalky residue and dirt so the primer or paint can adhere. Painting over an unwashed chalky surface commonly leads to peeling.
Luyện miễn phí toàn bộ 100 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- What is the primary purpose of caulking gaps around window trim before painting?
- When patching a small nail hole in interior drywall, which sequence is correct?
- Under the EPA Renovation, Repair and Painting (RRP) Rule, work that disturbs painted surfaces in housing built before which year generally triggers lead-safe requirements?
- Which work practice is REQUIRED by the EPA RRP Rule when disturbing lead-based paint in a pre-1978 home?
- What causes efflorescence, the white crystalline deposit sometimes seen on masonry and concrete?
- Before painting new bare wood trim, why is sanding in the direction of the grain important?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-33 Painting & Decorating Trade Exam · Quy trình kiểm tra