Surface PreparationCâu 16 / 100
When patching a larger hole in drywall, why is joint compound often applied in multiple thin coats rather than one thick coat?
a.Thin coats dry more evenly and shrink/crack less than one thick coat
b.Thin coats change the wall color
c.One thick coat is always stronger and preferred
d.Thin coats eliminate the need for sanding
Giải thích
Thick applications of joint compound shrink, crack, and take much longer to dry. Building up the repair in thin, progressively wider coats produces a flat, crack-free patch that feathers into the surrounding wall. Each coat is allowed to dry and is sanded or wiped before the next.
Luyện miễn phí toàn bộ 100 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Loose, flaking paint on old siding should be handled how before recoating?
- Why is it poor practice to paint over a wall contaminated with grease or oil?
- New galvanized (zinc-coated) steel often needs what preparation before painting to avoid adhesion failure?
- What is the main reason to remove dust after sanding and before painting?
- Knots and sap streaks in bare softwood can bleed through paint unless they are sealed with what?
- Why should exterior wood be checked for moisture content before painting?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-33 Painting & Decorating Trade Exam · Quy trình kiểm tra