Products & MaterialsCâu 39 / 100
If a coating is applied at 4 mils wet and the paint is 50% solids by volume, what is the approximate dry film thickness?
a.4 mils
b.2 mils
c.8 mils
d.1 mil
Giải thích
Dry film thickness equals wet film thickness times the percent solids by volume: 4 mils x 0.50 = 2 mils dry. The solvent portion evaporates, leaving only the solids as the dry film. Knowing solids content lets a painter target the specified dry mil thickness.
Luyện miễn phí toàn bộ 100 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A block filler is used on masonry primarily to do what?
- When selecting a coating for a surface exposed to constant direct sunlight, which property is especially important?
- A primer's main job is to do what?
- What is the purpose of adding a small, manufacturer-recommended amount of the correct thinner to paint for spraying?
- Which coating type is commonly used to bridge and waterproof hairline cracks on exterior stucco?
- Why should you avoid mixing incompatible coatings, such as applying a strong solvent-based lacquer over fresh latex?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-33 Painting & Decorating Trade Exam · Quy trình kiểm tra