ApplicationCâu 63 / 100
What is the correct spray technique for keeping film thickness uniform?
a.Arc the gun in a fanning motion at varying distances
b.Hold the gun perpendicular to the surface at a consistent distance and move at a steady speed with 50% overlap on each pass
c.Hold the gun as close as possible and move very slowly
d.Trigger the gun only at the middle of each pass
Giải thích
A uniform film comes from holding the gun perpendicular to the surface, keeping a constant distance, moving at a steady rate, and overlapping each pass by about half. Arcing the gun or changing distance produces uneven thickness and stripes. Triggering at the start and end of each stroke reduces buildup at the edges.
Luyện miễn phí toàn bộ 100 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Why should you 'back-brush' or 'back-roll' paint that was sprayed onto rough or porous exterior surfaces?
- What is the purpose of masking and using drop cloths before spraying?
- High relative humidity during application of latex paint tends to do what?
- When brushing trim, why is 'tipping off' with light strokes at the end helpful?
- Why should each coat be allowed to dry for the manufacturer's recommended recoat time before the next coat?
- What is 'cutting in' when painting a room?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-33 Painting & Decorating Trade Exam · Quy trình kiểm tra