Surface PreparationCâu 8 / 100
How should mildew on an exterior surface be treated BEFORE repainting?
a.Paint directly over it with two coats of the finish
b.Sand it off dry and leave the residue
c.Kill and remove it by cleaning the surface, commonly with a bleach-and-water or dedicated cleaning solution, then rinse
d.Cover it with clear caulk
Giải thích
Mildew is a living fungus; painting over it lets it grow through the new coating. It must be killed and washed off, often using a diluted bleach solution or a commercial mildew cleaner, followed by a thorough rinse. Using a mildew-resistant coating helps prevent regrowth in damp areas.
Luyện miễn phí toàn bộ 100 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Which work practice is REQUIRED by the EPA RRP Rule when disturbing lead-based paint in a pre-1978 home?
- What causes efflorescence, the white crystalline deposit sometimes seen on masonry and concrete?
- Before painting new bare wood trim, why is sanding in the direction of the grain important?
- What tool or method best confirms whether a concrete slab is dry enough to coat?
- Why should glossy or previously enamel-painted surfaces be 'de-glossed' before recoating?
- Bare ferrous (iron/steel) metal should be primed with what type of primer to prevent corrosion?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-33 Painting & Decorating Trade Exam · Quy trình kiểm tra