Thoát nước, Nước thải & Thông hơiCâu 109 / 360
Loss of a trap seal from siphonage or back pressure is primarily prevented by:
a.Proper venting of the drainage system
b.Using a larger trap
c.A deeper seal alone
d.Adding a cleanout
Giải thích
Venting introduces air to equalize pressure in the drainage system, which prevents siphonage and back pressure from pulling or pushing out the trap seal. A larger trap or a deeper seal alone does not correct the pressure imbalance, and a cleanout serves maintenance, not seal protection.
Trích dẫn luật: 2022 California Plumbing Code (CPC) §901.0Luyện miễn phí toàn bộ 360 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A 5 inch building sewer sloped at 1/4 inch per foot is permitted a maximum load of how many DFU?
- A 6 inch building drain sloped at 1/8 inch per foot is permitted a maximum load of how many DFU?
- A 2 inch building drain sloped at 1/4 inch per foot is permitted a maximum load of how many DFU?
- Developed length of a pipe run is measured as:
- In a wet-vented bathroom group, a wet-vent section carrying 4 DFU must be at least what size?
- An island sink, with no wall to run a vent up, is commonly vented using a:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-36 Plumbing Trade Examination · Quy trình kiểm tra