Thiết bị & Bình nước nóngCâu 209 / 360
A lavatory or sink is required to have an overflow only when:
a.it is made of stainless steel
b.it serves a commercial kitchen
c.it is set on a pedestal
d.the fixture design includes one; where provided, it must connect on the fixture side of the trap
Giải thích
Not every fixture must have an overflow, but where a fixture is furnished with one, the overflow passage must connect to the fixture side of the trap so its water is renewed and sealed. An overflow that connects on the sewer side would bypass the trap seal. The overflow must be designed so it cannot cause cross-contamination.
Luyện miễn phí toàn bộ 360 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A shower or tub-shower valve in a residence must be an approved anti-scald type that limits hot water temperature to a maximum of:
- A pressure-balancing shower valve protects a bather primarily by:
- The minimum required air gap between a fixture's water supply outlet and the fixture's flood-level rim protects against:
- Plumbing fixtures must be constructed of materials that are:
- A wall-hung urinal in a standard adult commercial restroom is typically set with the lip of the fixture at a maximum height above the floor of about:
- Compared with a two-piece water closet, a one-piece (integral tank and bowl) water closet generally offers which advantage?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-36 Plumbing Trade Examination · Quy trình kiểm tra