Thiết bị & Bình nước nóngCâu 214 / 360
A water heater's T&P relief valve must be installed so that it is:
a.accessible for inspection, testing, and replacement
b.concealed inside the wall
c.located below the tank base
d.sealed permanently to prevent tampering
Giải thích
The relief valve must remain accessible so it can be inspected, manually tested, and replaced when needed. Concealing or sealing it would prevent required maintenance. Its sensing element must reach into the top of the tank where water is hottest.
Trích dẫn luật: 2022 California Plumbing Code (CPC) §608.3Luyện miễn phí toàn bộ 360 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A wall-hung urinal in a standard adult commercial restroom is typically set with the lip of the fixture at a maximum height above the floor of about:
- Compared with a two-piece water closet, a one-piece (integral tank and bowl) water closet generally offers which advantage?
- A residential dishwasher discharge must be protected against backflow. Which method is an approved way to do this?
- Which of the following is prohibited between a water heater and its T&P relief valve?
- A water heater must be installed so that:
- The temperature-sensing element of a water heater T&P relief valve must be located so that it senses:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-36 Plumbing Trade Examination · Quy trình kiểm tra