Đường ống gaCâu 248 / 360
When performing a gas piping pressure test, why should the test gauge have an appropriate scale for the test pressure?
a.Because a bigger gauge always reads more accurately
b.Because the code bans digital gauges
c.So that a small pressure drop is readable, the gauge increment should be fine enough to detect a leak
d.Because gauges must always read in psi, never inches of water
Giải thích
The test gauge or manometer must have an increment fine enough that a small leak shows up as a readable pressure drop over the hold period. An oversized gauge with coarse graduations can hide a slow leak. Match the instrument range and resolution to the required test pressure and the sensitivity needed.
Luyện miễn phí toàn bộ 360 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Where should the sediment trap be installed in relation to the appliance shutoff valve and the appliance gas control?
- What is a common standard delivery pressure of natural gas to a typical single-family residence downstream of the utility meter?
- Low gas pressures for appliances are commonly expressed in inches of water column. Which instrument directly reads this pressure during setup and testing?
- What best describes CSST used in gas distribution?
- Two runs leave the meter: Run A is 55 feet to the farthest outlet; Run B is 30 feet. Using the longest-length method, which length column governs sizing of the entire system?
- An appliance shutoff valve is being installed. Which condition satisfies the accessibility requirement?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-36 Plumbing Trade Examination · Quy trình kiểm tra